Page has been moved and refactored! Go to: Network
Setting up coLinux networking on Microsoft Windows (XP or 2000)[]
See Network#Introduction Refactored into Network#Introduction This part has been refactored into Getting_Started_with_coLinux#Overview
Refactored into Network#Introduction
Setting up Network Address Translation (NAT)[]
Refactored to Network#NAT_.28Overview.29
Setting up Network Address Translation (NAT), Step 1: Install the TAP-Win32 virtual network device[]
Refactored into Network#Installation:__Host
Setting up Network Address Translation (NAT), Step 2: Enable Internet Connection Sharing (ICS)[]
refactored into Network#Setting_up_ICS_.28alternate_explanation
Setting up Network Address Translation (NAT), Step 2 (option B): Install NAT software because Internet Connection Sharing is not available (using in large enterprise)[]
refactored into Network#LanSuite_Instead_of_ICS
Setting up Network Address Translation (NAT), Step 3: Edit your coLinux xml config file[]
Refactored into Network#Installation:__Host
Setting up Network Address Translation (NAT), Step 4: Boot coLinux[]
Setting up Network Address Translation (NAT), Step 5: Setup the network interface within Linux.[]
Refactored into Network#Static_IP_addresss.2C_Debian
Setting up Network Address Translation (NAT), Step 6: Set the the IP-address of the DNS of your ISP.[]
Refactored into Network#Static_IP_addresss.2C_Debian
Setting up Network Address Translation (NAT), Step 7: Activate the config file modifications you've done.[]
Refactored into Network#Static_IP_addresss.2C_Debian
Setting up Network Address Translation (NAT), Note for Gentoo.[]
Refactored into Network#Static_IP_addresss.2C_Debian
Setting up native network (Bridged)[]
Refactored into Network#Bridged_.28Overview.29
Setting up native network (Bridged), Step 1: Install the windows part[]
Refactored into Network#Bridged_.28Overview.29
Setting up native network (Bridged), Step 1: Option 1: native Windows network bridge[]
Refactored to Network#Bridged_with_TAP_and_Windows_Software_Bridge
Setting up native network (Bridged), Step 1: Option 2: WinPCAP[]
Refactored to Network#Bridged_with_WinPcap
Setting up native network (Bridged), Step 2: Boot coLinux and update the network settings within Linux.[]
Refactored to Network#Bridged_.28coLinux_Guest.29
Setting up native network (Bridged), Step 3: If not using DHCP, update the client DNS setting.[]
Refactored to Network#DNS_Nameservers
Setting up native network (Bridged), Step 4: Activate the config file modifications you've done.[]
Refactored to Network#Restarting_an_Interface
Setting up native network (Bridged), On Vmware running Windows XP SP2[]
Refactored to Network#Bridged.2C_on_vmWare_running_Windows_XP_SP2
Troubleshooting[]
Refactored to Network#Troubleshooting
Miscellaneous suggestions[]
Refactored to Network#Miscellaneous_suggestions
Ideas for refactoring this document[]
Refactored to Network#Miscellaneous_suggestions
Wiki Pollution (i.e. horribly formatted/categorized/sorted)[]
Refactored toNetwork#Reorganize_This_Stuff
Brief but useful setup outline tips for Microsoft XP[]
Refactored to Network#Brief_but_useful_setup_outline_tips_for_Microsoft_XP
Other Links[]
Refactored to Network#Other_Resources