coLinux
Advertisement

Page has been moved and refactored! Go to: Network

Setting up coLinux networking on Microsoft Windows (XP or 2000)[]

See Network#Introduction Refactored into Network#Introduction This part has been refactored into Getting_Started_with_coLinux#Overview


Contents


Refactored into Network#Introduction

Setting up Network Address Translation (NAT)[]

Refactored to Network#NAT_.28Overview.29

Setting up Network Address Translation (NAT), Step 1: Install the TAP-Win32 virtual network device[]

Refactored into Network#Installation:__Host

Setting up Network Address Translation (NAT), Step 2: Enable Internet Connection Sharing (ICS)[]

refactored into Network#Setting_up_ICS_.28alternate_explanation

Setting up Network Address Translation (NAT), Step 2 (option B): Install NAT software because Internet Connection Sharing is not available (using in large enterprise)[]

refactored into Network#LanSuite_Instead_of_ICS

Setting up Network Address Translation (NAT), Step 3: Edit your coLinux xml config file[]

Refactored into Network#Installation:__Host

Setting up Network Address Translation (NAT), Step 4: Boot coLinux[]

Setting up Network Address Translation (NAT), Step 5: Setup the network interface within Linux.[]

Refactored into Network#Static_IP_addresss.2C_Debian

Setting up Network Address Translation (NAT), Step 6: Set the the IP-address of the DNS of your ISP.[]

Refactored into Network#Static_IP_addresss.2C_Debian

Setting up Network Address Translation (NAT), Step 7: Activate the config file modifications you've done.[]

Refactored into Network#Static_IP_addresss.2C_Debian

Setting up Network Address Translation (NAT), Note for Gentoo.[]

Refactored into Network#Static_IP_addresss.2C_Debian

Setting up native network (Bridged)[]

Refactored into Network#Bridged_.28Overview.29

Setting up native network (Bridged), Step 1: Install the windows part[]

Refactored into Network#Bridged_.28Overview.29

Setting up native network (Bridged), Step 1: Option 1: native Windows network bridge[]

Refactored to Network#Bridged_with_TAP_and_Windows_Software_Bridge

Setting up native network (Bridged), Step 1: Option 2: WinPCAP[]

Refactored to Network#Bridged_with_WinPcap

Setting up native network (Bridged), Step 2: Boot coLinux and update the network settings within Linux.[]

Refactored to Network#Bridged_.28coLinux_Guest.29

Setting up native network (Bridged), Step 3: If not using DHCP, update the client DNS setting.[]

Refactored to Network#DNS_Nameservers

Setting up native network (Bridged), Step 4: Activate the config file modifications you've done.[]

Refactored to Network#Restarting_an_Interface

Setting up native network (Bridged), On Vmware running Windows XP SP2[]

Refactored to Network#Bridged.2C_on_vmWare_running_Windows_XP_SP2

Troubleshooting[]

Refactored to Network#Troubleshooting

Miscellaneous suggestions[]

Refactored to Network#Miscellaneous_suggestions

Ideas for refactoring this document[]

Refactored to Network#Miscellaneous_suggestions

Wiki Pollution (i.e. horribly formatted/categorized/sorted)[]

Refactored toNetwork#Reorganize_This_Stuff

Brief but useful setup outline tips for Microsoft XP[]

Refactored to Network#Brief_but_useful_setup_outline_tips_for_Microsoft_XP

Other Links[]

Refactored to Network#Other_Resources

Advertisement